? ? ? the 2sd 106a is an ultra-compact dual scale driver for igbts with blocking voltages up to 1200v. the two drive channels feature an electrical isolation between the control electronics and the power section. each channel is equipped with a programmable vce monitoring function for protection against short circuit and over-current. the driver supplies a gate current of +/-6a. the gate voltage is +/-15v. the integrated dc/dc converter supplies a drive power of 1 w per channel. the interface is compatible to all logic families (5...15v). the driver can be operated in two modes : either with two independent driver channels or as a half-bridge driver with internal dead-time generation. ? ? ? ? ? ? ? ?? parameter min typ max unit ? ? ? ? ? ?? nominal supply voltage v dc , v dd ? 15 ? vdc ?? supply current without load? i dc + i dd ? 35 ? ma ?? supply current with maximal load? last i dc + i dd ? ? 170 ma ?? output power dc/dc converter (both channels) ? ? 2 w ?? efficiency dc/dc converter ? 85 ? % ?? delay time input to output (turn on) ? 300 ? ns ?? delay time input to output (turn off) ? 350 ? ns ?? peak output current (gate current) i g -6 ? +6 a ?? output rise time ? 100 ? ns ?? output fall time ? 80 ? ns ?? isolation test voltage (vac/50hz/1min) ? ? 4000 vac ?? partial discharge extinction voltage acc. iec270 ? >1200 ? v peak ?? creep paht input to output ? 12,7 ? mm ?? guaranteed dv/dt immunity (input to output)? dv/dt 100 ? ? kv/s ?? operating temperature 2SD106Ai -40 ? +85 c ?? operating temperature 2SD106An 0 ? +70 c ? ? ? ? ? ct-concept technology ltd. - 2SD106A - 2 channel driver for igbts up? to 1200v http://local/cd-rom/english/products/2sd106/2SD106A.htm (1 von 2) [26.05.1999 22:57:33]
|
